Zero Liquid Discharge Plant

SHRI LAXMI offers complete thermal and non-thermal ZLD solutions to manage tough-to-treat wastewaters. SHRI LAXMI proprietary evaporators, brine concentrators, and crystallizers can help recover more than 95% of your wastewater while reducing the remaining brine as a product or solid. SLEW Severs total organic carbon (TOC) analyzers help control the quality of water to be reclaimed or recycled in semiconductor operations. Zero liquid discharge technologies help plants meet discharge and water reuse requirements, enabling your business to:
• Meet Stringent Cooling Tower Blowdown And Flue Gas Desulfurization (FGD) Discharge Regulations.
• Treat And Recover Valuable Products From Waste Water Sources.
• Better Manage Thegenerated Output Water.
• Control The Water Quality That Is To Be Reclaimed Or Recycled

What’s included in a basic ZLD treatment system?

The exact components of a ZLD treatment system will largely depend on the volume of dissolved material present in the waste, the system’s required flow rate what specific contaminants are present. But in general, a basic ZLD treatment system typically includes some type of:

• Clarifier And/Or Reactor To Precipitate Out Metals, Hardness, And Silica
• Chemical Feed To Help Facilitate The Precipitation, Flocculation, Or Coagulation Of Any Metals And Suspended Solids
• Filter Press To Concentrate Secondary Solid Waste After Pre-Treatment Or Alongside An Evaporator
• Ultrafiltration (UF) To Remove All The Leftover Trace Amounts Of Suspended Solids And Prevent Fouling, Scaling, And/Or Corrosion Down The Line Of Treatment
• Reverse Osmosis (RO) To Remove The Bulk Of Dissolved Solids From The Water Stream In The Primary Phases Of Concentration
• Brine Concentrators To Further Concentrate The Reject RO Stream Or Reject From Electrodialysis To Further Reduce Waste Volume
• Evaporator For Vaporizing Access Water In The Final Phases Of Waste Concentration Before Crystallizer.
• Crystallizer To Boil Off Any Remaining Liquid, Leaving You With A Dry, Solid Cake For Disposal

Waste Water Constituents

Careful consideration of waste water chemistry is needed for the successful design and operation of a zero liquid discharge system. A sound water chemistry design basis is key to successful zero liquid discharge design. The chemical constituents of concern for a zero liquid discharge system typically are as follows:

ZLD Treatment Process Stages

Stage 1

• Preliminary Treatment
• Effluent Screening Process
• Oil Removal Process
• Effluent Mixing Process
• PH Correction Process

Stage 2

• Electrochemical Coagulation And Flocculation Process
• Primary Sudge Settling, Treatment Process.
• TSS, Colour & Associated BOD/COD Removal Process
• Hardness & Heavy Metals Removal Process.

Stage 3

• Biological Treatment Process
• Secondary Sludge Settling Process.
• Sludge Treatment Process
• BOD & COD Removal Process.

Stage 4

• Depth Filtration/ Polishing Process
• Polishing Of TSS, SDI, Color, Turbidity, Virus Etc.

Stage 5

• TDS Removal Process.
• Salt Crystallization Process.

Benefits of ZLD Plant

Zero liquid discharge plant technology is growing globally as an important wastewater management strategy to reduce water pollution and extend water supply. The main benefits of ZLD are:

• Minimizes Wastewater Discharge
• Maximizes Water Recovery.
• Create A Valuable Product For Sale.
• Removing Environmental Issues.

About ZLD

Zero Liquid Discharge (ZLD) is a water treatment process with a goal of recirculation of all of the possible water back to the process with zero liquid waste. The ultimate treatment process has zero or nearly zero adverse impact on the environment.

Pre-treatment - reducing TSS, COD, Turbidity to filter out particle impurities or precipitation of sparingly soluble compounds to allow additional treatment.

Concentration of dissolved solids - by membrane technologies, either by a combination of reverse osmosis (RO) with electrodialysis (EDR). The way of concentrating RO brine by EDR. Or single step electrodialysis. Using these technologies to concentrate the stream we can achieve more than 98 % of recovery.

Thermal treatment - the last step is usually consisting of Evaporator/Crystallizer to generate solids. Final evaporation of remaining water for re-use together with precipitation of solid waste for disposal in a controlled landfill or to be sold as a valuable product (pure NaCl Na2SO4 etc.)